Flying Scotsman
A little more done to the cab today, this time the washout plugs and cover. I have followed Don's overall dimensions with a slight change in design, I'll explain.. the picture shows one cover after most of the machining has been completed, IIRC dimensions are flange
Flying Scotsman
Today I made a start on the window frames, I made templates for the side windows first although forgot to take any pictures of these. there's not much to see on these yet anyway, just the basic outlines cut in alloy to check for fit and that the
Flying Scotsman
Now, I stated early on that I would make this a removable item, this is for two main reasons, first it gives me a better view of the manifold and the various working valves associated with it, second, it will allow more light into the cab and thus help me
Flying Scotsman
I then made a start on the cab, again I have made use of Malcolm and laser cut parts, this cab when completed will be highly detailed, I plan to include everything which is humanly possible and it will all work. So I have set myself a heavy task and
Flying Scotsman
Onto the first motion parts, I had planned at this stage to start stripping the frames down ready for paint but when reading a fellow model engineers update in regards to machining the radius to the axle boxes to allow for tilt I remembered that I wanted to get the
Flying Scotsman
Something that needs doing now before moving on much more with the chassis assembly is to make the sander rear mounting plates and drill/tap their mounting holes before painting the frames. Also before I can strip everything down to paint I have a few jobs to get out of
Flying Scotsman
All of the crank-pins have raised steps that sit flush with the wheel boss at 19/32nd diameter so each started off as a piece of silver steel at that diameter.The first job was to machine the spigots that fit into the wheels, these are 9/16th for